AUTOOL SDT208 Smoke For Leak Detection

AUTOOL SDT208 Car Vacuum Leak Tester Features

• Fast smoke output: smoke output within ten seconds, greatly improving your efficiency in the test.
• Built-in Air Pump: Customers do not need to purchase additional air pumps, we use high-quality materials, after many tests, please rest assured to use. You can save more time and money
• Pro EVAP Detection: In line with the technical requirements of the car repair shop EVAP test. The SDT208 can detect tiny leaks up to 0.5mm and has a hold-limit pressure protection function in EVAP mode, so as to protect vehicle pipes from damage.
• Flow Meter & Pressure Gauge: A flowmeter controls the pressure of the detection pipeline, effectively protecting it from damage. By observing the pressure gauge, you can determine whether the pipeline is leaking more quickly and accurately. Usually, the pressure gauge continues to rise, indicating that there is no problem with the pipeline. If the pressure gauge continues to decrease, Explain that the pipeline leak needs to be repaired.
• Air Mode & Smoke Mode: Built-in air pump and smoke generator, so it does not rely on an additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 7-15 seconds, dramatically reducing diagnostic time. Smoke output value: 15L/min.
• Overheat and anti-freeze protection: The Autool SDT208 Smoke Detector Machine features the latest intelligent protection devices. When the temperature exceeds 75℃ the protection device will only activate and shut down the power supply to protect the operator and the equipment. It not only withstands high temperatures but also operates effectively in low temperatures.
• Wide Range of Applications: The AUTOOL SDT208 Smoke Leak Detector is suitable for detecting leaks in automobiles, motorcycles, snowmobiles, ATVs, ATVs, light trucks, and speed boats, suitable for all models( for 12V/24V DC).
• 3-Year Warranty: For damage caused by non-human factors, we promise to reissue parts free of charge within 3 years.

How To Use The AUTOOL SDT205 Smoke For Leak Detection?

• Step 1: Fill 10-15ml baby oil into the detector for the first time. Open the engine cover, and hang the detector in the cover.
• Step 2: Disconnect the pipe that needs to be connected to the detector.
• Step 3: Connect the detector with the DC12V battery, turn on the power switch, and the detector starts to work.
• Step 4: In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use a headlamp if necessary.