About this item

• MR CARTOOL V30 Universal Fuel Injector Driver is designed for testing fuel injector issues such as stucking, leakage, or damage. Six testing modes satisfy various injector testing requirements. Equipped with 2 pulse lines, which can be used with the normal ultrasonic cleaning tank.
• Application: Only supports testing of ordinary gasoline injectors, diesel injectors and high-pressure GDI injectors are not supported.
• Test Mode 1: Generates a 100-millisecond wide pulse every 1 second, continuously outputting pulses to the fuel injector. During testing, the sound of the injector’s action should be audible. Use a multimeter to measure voltage fluctuations in the injector electrode. The digital display shows the continuous testing time in minutes.
• Test Mode 2: Outputs 100 pulses with each pulse having a width of 5 milliseconds. Observe the fuel injector during testing; the digital display shows the number of consecutive test pulses.
• Test Mode 3: Outputs 1000 pulses with each pulse having a width of 3 milliseconds. Observe the fuel injector during testing; the digital display shows the number of consecutive test pulses.
• Test Mode 4: Simulates an idle state by continuously outputting pulses to the fuel injector. The digital display shows the continuous testing time in minutes.
• Test Mode 5: Simulates a medium-speed state by continuously outputting pulses to the fuel injector. The digital display shows the continuous testing time in minutes.