AUTOOL Tyre Service & Lifting Equipment
Heavy-duty commercial workshop equipment from AUTOOL. Engineered for high-throughput automotive service centers, tyre outlets, and dealerships: 4.5-ton hydraulic two-post & four-post lifts, optical 3D four-wheel aligners, pneumatic run-flat tyre changers, dynamic digital wheel balancers, wall-mount tyre inflators, and multi-drawer rolling tool trolleys.
Hydraulic Vehicle Lifting Equipment
Heavy-duty 4.5-ton hydraulic two-post lifts, four-post alignment racks, and ultra-thin scissor lifts built with dual synchronization cables, electromagnetic safety locks, and CE-certified structural steel.
Clear Floor Overhead
Model: ATL-4.5D
AUTOOL ATL-4.5D Clear-Floor 4.5-Ton Two-Post Hydraulic Vehicle Lift
Professional overhead clear-floor two-post vehicle lift designed for unobstructed floor space under vehicles. Features dual direct-drive hydraulic cylinders, electromagnetic safety locks on both columns, and heavy-duty 3-stage asymmetric arms.
- Lifting capacity: 4,500 kg (9,920 lbs) with 1,900 mm maximum lift height
- Overhead padded shut-off safety bar prevents vehicle roof damage
- Dual synchronization aircraft-grade steel equalization cables
- Electric single-point safety lock release system
Low Ceiling Friendly
Model: ATL-4.5C
AUTOOL ATL-4.5C Floor-Plate 4.5-Ton Two-Post Hydraulic Vehicle Lift
Commercial floor-plate two-post lift engineered for workshops with lower ceiling heights. Cables and hydraulic hoses are protected under a low-profile beveled steel drive-over floor plate.
- Lifting capacity: 4,500 kg with 2,824 mm total column height
- Heavy-duty dual hydraulic cylinders with polyurethane chain guards
- Drop-in height adapters with multi-position arm restraint gears
- Durable electro-static powder-coated finish for corrosion resistance
Wheel Alignment Ready
Model: ATL-4.5F
AUTOOL ATL-4.5F 4.5-Ton Four-Post Alignment Vehicle Lift
Precision four-post vehicle lift designed specifically for 3D four-wheel alignment and general chassis servicing. Includes recessed front turn-table pockets, extra-long rear slip plates, and pneumatic safety lock release.
- Rated capacity: 4,500 kg with extra-wide 5,000 mm runway length
- Integrated turntable recesses and low-friction ball-bearing rear slip plates
- Pneumatic multi-position mechanical safety ladders on all 4 posts
- Optional rolling center jack available for wheel-free suspension servicing
Space-Saving Scissor
Model: ATL-4SM
AUTOOL ATL-4SM 4-Ton Ultra-Thin Surface / In-Ground Scissor Lift
High-performance ultra-thin hydraulic scissor lift suitable for surface mounting or in-ground flush installation. Ideal for quick tyre service bays, express inspection, and suspension diagnostics with zero column obstruction.
- Lifting capacity: 4,000 kg with 2,050 mm maximum lifting stroke
- Ultra-thin 105 mm collapsed profile allows low-clearance sports cars
- Pneumatic dual-tooth mechanical safety lock with self-lubricating bushings
- Hydraulic synchronization circuit ensures rock-solid level lifting
3D Wheel Aligner Machines
Industrial high-definition 3D camera four-wheel alignment systems with passive target discs, vehicle chassis database, and live 3D graphic adjustment guidance.
Dual HD 5MP Cameras
Model: XC503
AUTOOL XC503 High-Definition 3D Four-Wheel Aligner Machine
Advanced 3D optical wheel aligner equipped with dual 5-megapixel high-speed industrial cameras and shatter-proof passive target discs. Delivers real-time caster, camber, toe, thrust angle, and steering axis inclination (SAI) measurements in under 2 minutes.
- Dual 5.0 Megapixel high-definition optical digital camera beam
- Four lightweight passive target discs (no electronic batteries or cables on wheels)
- 4-point precision rim clamps fitting 11" to 25" wheels without scratching
- Massive vehicle database with over 60,000 global and Indian vehicle specs
Flagship Auto-Tracking Beam
Model: XC505
AUTOOL XC505 Intelligent Auto-Tracking 3D Four-Wheel Aligner
Flagship intelligent 3D wheel aligner featuring a motorized auto-tracking camera beam that automatically tracks vehicle lift height from floor to full elevation. Eliminates manual beam adjustment for flawless pit and lift workflow.
- Intelligent motorized camera beam automatically follows lift height in real time
- High-speed image processing engine calculates vehicle geometry in milliseconds
- 32-inch high-visibility LED monitor display with 3D animation adjustment guides
- Comprehensive printout with Before/After customer diagnostic report
tyre Changers and Wheel Balancers
Pneumatic tilt-back tyre changing machines with robotic assist arms alongside precision digital wheel balancers with laser weight positioning.
Pneumatic Tilt-Back
Model: TCA403
AUTOOL TCA403 Pneumatic Tilt-Back tyre Changer with Assist Arm
Heavy-duty commercial pneumatic tilt-back tyre changer fitted with a multi-function pneumatic assist arm. Effortlessly dismounts stiff low-profile, run-flat, and oversized SUV tires without rim scratching.
- Clamping capacity: Outer 10"-21", Inner 12"-24" rim diameters
- Pneumatic helper assist arm with rotating bead-pressing disc and roller
- Heavy-duty bead breaker cylinder delivering 2,500 kg breaking force
- High-torque bidirectional turntable motor with self-centering 4-jaw clamp
Dual Robotic Assist Arms
Model: TCA505
AUTOOL TCA505 Heavy-Duty Automatic tyre Changer with Dual Assist Arms
Flagship automatic tyre changer with dual robotic pneumatic assist arms designed for high-end luxury wheels, ultra-wide sport tires, and run-flats up to 26 inches. Features foot-operated pneumatic bead breaker and pneumatic column lock.
- Large turntable clamping range up to 26 inches rim size
- Dual pneumatic robotic assist arms ensure safe demounting of rigid sidewalls
- Reinforced box-steel frame eliminates column deflection under heavy loads
- Built-in tubeless tyre rapid bead seating inflation jet system
Laser Guided Balancing
Model: TWB205
AUTOOL TWB205 Dynamic Digital Wheel Balancer with Laser Weight Pointer
State-of-the-art dynamic wheel balancer featuring a 17-inch color LCD display and precision laser line pointer indicating the exact 6 o’clock or 12 o’clock adhesive weight location. Includes automatic 3D distance and diameter input gauge.
- Rim diameter range: 10" to 28" (254mm - 711mm); Rim width: 1.5" to 20"
- Balancing precision: ±1g with ultra-fast 7-second measuring cycle
- Precision laser beam automatically pinpoints the exact adhesive stick-on weight line
- Multi-balancing modes: Dynamic, Static, ALU-1, ALU-2, ALU-S, and Motorcycle mode
Compact & High Accuracy
Model: TWB203
AUTOOL TWB203 Compact Precision Digital Wheel Balancer
Reliable and compact digital wheel balancer designed for tyre shops and independent service bays. Features a bright digital LED panel, automatic distance ruler, and self-calibration software.
- Max wheel weight: 65 kg; Rim diameter: 10" to 24"
- Microprocessor balancing sensor with self-diagnostics and auto-calibration
- Heavy-duty 40mm threaded balancing shaft with quick-release wing nut
- Protective wheel hood with automatic hood-down spin activation
tyre Inflator Machines
Wall-mounted automatic digital tyre inflators featuring ceramic pressure transducers, customizable pre-set pressure cut-offs, and overpressure seating programs.
Wall-Mounted Digital
Model: DIGITAL-WALL-INFLATOR
Automatic Digital Wall-Hanging tyre Inflator (Nitrogen & Air)
Industrial wall-mounted automatic tyre inflator with dual digital LED displays. Automatically inflates or deflates to target PSI with ±0.5% accuracy. Features bead overpressure seating mode and audible completion buzzer.
- Pressure measurement range: 5 to 145 PSI (0.3 to 10 bar) with 0.1 PSI resolution
- Ceramic pressure sensor ensures high repeatability and thermal stability
- Overpressure setting mode (OPS) for secure tyre bead seating on new tires
- Includes 10-meter heavy-duty air hose with clip-on brass chuck
Workshop Tool Trolleys and Storage Carts
Heavy-gauge steel roller cabinets, service utility carts, diagnostic workstation trolleys, and fully loaded 201-piece mechanics tool trolley sets with industrial lockable casters.
7-Drawer Heavy Duty
Model: T27
AUTOOL T27 7-Drawer Industrial Roller Cabinet Tool Cart
Rugged 7-drawer mobile tool cabinet crafted from 1.2mm reinforced cold-rolled steel. Equipped with heavy-duty ball-bearing slide rails, central cylinder lock, anti-tilt mechanism, and 500kg static load capacity.
- 7 full-extension ball-bearing drawers with EVA non-slip foam drawer liners
- Dual central key lock secures all drawers simultaneously
- Four 5-inch industrial polyurethane casters (2 fixed, 2 swivel with brakes)
- Top work surface covered with durable grooved rubber protector mat
3-Tier Utility Cart
Model: T22
AUTOOL T22 Heavy-Duty 3-Tier Multi-Function Workshop Tool Trolley
Versatile 3-tier mobile service cart with deep leak-proof trays, side screwdriver slots, and an ergonomic tubular push handle. Ideal for parts transport, oil changes, and assembly teardown.
- Total load capacity: 250 kg across 3 heavy-gauge steel shelves
- Deep rim lip prevents tools and components from sliding off during transport
- Oil-resistant and chemical-resistant electrostatic powder coating
- 360° swivel casters with dual foot-brake locks
Compact Service Cart
Model: T21
AUTOOL T21 Multi-Tier Rolling Service Cart with Side Pegboard
Compact rolling workshop utility cart featuring perforated side pegboard panels for hanging pliers, wrenches, and power tools within arm’s reach.
- High-rigidity bolted frame structure supporting up to 200 kg load
- Side perforated pegboard panel compatible with standard tool hooks
- Ergonomic push handle with smooth corner bumpers
- Smooth-rolling noiseless rubber wheels with brake pedals
Diagnostic Station
Model: T31
AUTOOL T31 Mobile Diagnostics Workstation Trolley
Specialized mobile computer workstation cart designed for automotive diagnosticians. Features dedicated platforms for laptops, OBD2 scan tools, oscilloscopes, battery chargers, and internal cable routing channels.
- Top platform with non-slip mat and raised edges for diagnostic laptops and tablets
- Lockable lower storage compartment for expensive scanners and interface modules
- Side holster hooks for OBD2 cables, power clamps, and test leads
- Built-in multi-outlet surge protector power strip mounting bracket
EV & Advanced Diagnostics
Model: T53
AUTOOL T53 Automotive Service Tool Cart for EV & Diagnostics
Premium specialized automotive tool cart engineered for electric vehicle battery maintenance, high-voltage insulated tool storage, and sensitive programming equipment.
- Modular partitioned drawers designed for 1000V insulated safety tool sets
- Integrated grounding wire connector for static electricity discharge
- Heavy-duty industrial rubber wrap-around corner bumpers protect customer vehicle paint
- Reinforced structural chassis rated for 350 kg load
Dedicated Brake Service Cart
Model: T20
AUTOOL T20 Automotive Service Cart - For Brake Fluid Exchanger
Purpose-built mobile platform cart engineered specifically to house AUTOOL AST605, AST618, and AST612 brake fluid exchangers. Features molded bottle cradles, waste fluid catch reservoir, and hose winding hooks.
- Custom upper platform securely locks brake fluid exchanger machines in place
- Dual dedicated circular bottle racks for fresh brake fluid containers
- Removable drip catch tray prevents caustic brake fluid from touching workshop floors
- Compact narrow-track wheelbase maneuvers effortlessly between vehicle lift bays
Fully Loaded 7-Drawer
Model: 201-PIECE-SET
201-Piece Heavy-Duty Tool Trolley Set with Mechanics Tools
Complete turnkey workshop solution: A heavy-duty 7-drawer mobile roller cabinet fully equipped with 201 pieces of professional-grade Chrome Vanadium (CR-V) mechanics tools organized in custom dual-color CNC foam shadow trays.
- Includes 1/4", 3/8", and 1/2" 72-tooth ratchet sets with complete metric sockets
- Combination spanners, ratcheting wrenches, torx/hex keys, screwdrivers, and pliers
- High-density CNC dual-color foam cutouts ensure missing tools are spotted instantly
- Drop-forged Chrome Vanadium steel with micro-satin anti-corrosion finish
Why Commercial Workshops Choose AUTOOL Under-Car Equipment
Engineered for structural rigidity, technician safety, and high-throughput tyre and suspension turnaround.
CE-Certified Dual Safety Locking
All AUTOOL two-post and scissor lifts feature heavy-duty mechanical safety lock ladders, parachute hydraulic safety valves, and aircraft-grade synchronization cables for 100% technician safety.
Passive Target Optical 3D Alignment
Zero electronics, zero sensors, and zero batteries mounted on wheels. AUTOOL lightweight passive targets cannot be knocked out of calibration by drops, providing lifetime repeatability.
Scratch-Free Robotic Run-Flat Demounting
Pneumatic helper assist arms apply continuous downward pressure along the bead circumference, allowing a single operator to demount rigid low-profile and run-flat tires without alloy wheel damage.
High-Throughput tyre & Alignment Workflow
How AUTOOL chassis and wheel machinery accelerate turnaround times in high-volume tyre service centers.
Elevate on AUTOOL Lift
Quickly raise vehicle using ATL-4.5D two-post or scissor lift with 3-stage asymmetric arms engaging factory jacking points safely.
Dismount & Replace Tire
Position wheel on AUTOOL TCA403 tyre changer. Engage the robotic assist arm to effortlessly break the bead and mount new tyre without alloy contact.
Laser Dynamic Balancing
Mount assembly on TWB205 balancer. In 7 seconds, laser line points to the exact 6 o’clock stick-on weight placement for zero-vibration ride.
3D Optical Alignment
Clamp XC503 targets to all 4 wheels. Dual 5MP HD cameras calculate live camber, caster, and toe angles with full before/after customer reports.
tyre Service & Lifting Equipment FAQs
Common questions on workshop installation, foundation requirements, and equipment support in India.
What concrete foundation is required for installing AUTOOL 4.5-Ton lifts?
For AUTOOL ATL-4.5D and ATL-4.5C two-post lifts, we recommend a minimum concrete depth of 150mm (6 inches) with a compressive strength of at least 3,000 PSI (C20/25 grade), fully cured for at least 28 days. Heavy-duty anchor bolts and installation templates are provided.
How often do the AUTOOL XC503 / XC505 3D wheel aligners need calibration?
AUTOOL 3D wheel aligners use solid-state passive optical target boards that contain no electronic sensors or gyroscopes. Unlike older CCD wireless systems, the passive targets do not lose calibration when dropped or bumped. The camera beam is calibrated during initial installation and remains factory accurate for years.
Can the TCA403 and TCA505 tyre changers handle run-flat and low-profile tires?
Yes! Both models come equipped with multi-function pneumatic assist robotic arms designed specifically to depress the stiff sidewall of run-flat tires (Bridgestone RFT, Michelin ZP, Pirelli RunFlat) while the demount duckhead clears the bead safely without scratching alloy rims.
What warranty and after-sales service is provided across India?
All equipment comes with an Official 2-Year Warranty backed directly by Saras Auto Electricals. We maintain full inventories of hydraulic power units, cylinders, cables, optical target boards, seal kits, and provide engineer installation assistance nationwide.
Modernize Your tyre & Lifting Bay Today
Direct import pricing, GST invoice credit, verified installation guidelines, and nationwide dispatch from Saras Auto Electricals.